ATMEGA329V-8AI vs ATMEGA329P-20AU Comparaison

Comparaison détaillée côte à côte de ATMEGA329V-8AI par Microchip Technology et ATMEGA329P-20AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA329V-8AI ATMEGA329V-8AI - 8-bit AVR MCU 32KB Flash LCD | Microchip

ATMEGA329V-8AI - 8-bit AVR MCU 32KB Flash LCD | Microchip

ATMEGA329V-8AI ✓ Actif
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA329V-8AI ATMEGA329P-20AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,45 $4,71
Core Architecture 8-bit AVR RISC AVR (8-bit RISC, Harvard)
CPU Speed 8 MHz —
Program Memory (Flash) 32 KB (16K x 16) 32 KB (16K x 16), In-System Programmable with RWW
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
Supply Voltage (Vcc) 1.8 V to 5.5 V 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General Purpose I/O 54 lines —
General Purpose Registers 32 —
LCD Controller On-chip, supports up to 4x25 segments —
ADC 10-bit, up to 8 channels 10-bit, up to 8 single-ended channels
Timers/Counters Three flexible Timer/Counters with PWM —
Serial Interfaces USART, SPI, TWI (I2C-compatible) —
Debug Interface JTAG (IEEE 1149.1 compliant) JTAG (IEEE 1149.1 compliant)
Boîtier 64-pin TQFP, 14x14 mm body, 0.5 mm pitch 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Type de montage Surface Mount Surface Mount
Température de fonctionnement -40C to +85C (industrial) -40C to +85C (industrial, -A suffix)
Statut RoHS Compliant Compliant (Pb-free / Green)
Instruction Set — 131 instructions, mostly single-cycle
Maximum Clock Speed — 20 MHz
Throughput — Up to 20 MIPS at 20 MHz
General-Purpose I/O Pins — 54
General-Purpose Working Registers — 32
PWM Channels — 6
Communication Peripherals — 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Power-Save Modes — Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support — Yes (peripheral touch controller via library)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis