ATMEGA32M1-AU vs ATMEGA16M1-AU Comparaison

Comparaison détaillée côte à côte de ATMEGA32M1-AU par Microchip Technology et ATMEGA16M1-AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA32M1-AU ATMEGA32M1-AU - 8-bit AVR MCU 32KB Flash 16MHz TQFP-32 | Microchip

ATMEGA32M1-AU - 8-bit AVR MCU 32KB Flash 16MHz TQFP-32 | Microchip

ATMEGA32M1-AU ✓ Actif
Microchip Technology
ATMEGA16M1-AU ATMEGA16M1-AU - AVR MCU 16MHz, CAN+LIN, TQFP-32 | Microchip

ATMEGA16M1-AU - AVR MCU 16MHz, CAN+LIN, TQFP-32 | Microchip

ATMEGA16M1-AU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA32M1-AU ATMEGA16M1-AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,98 $4,95
Core Architecture 8-bit AVR RISC AVR 8-bit RISC (133 instructions, most single-cycle)
Flash Program Memory 32 KB (16K x 16) ISP FLASH 16 KB (8K x 16), self-programming
EEPROM 1 KB 512 B
SRAM 2 KB 1 KB
Fréquence d'horloge maximale 16 MHz —
Supply Voltage Range 2.7 V to 5.5 V —
General Purpose I/O Lines 27 —
ADC 11-channel, 10-bit 8-channel, 10-bit
DAC 1-channel, 10-bit —
Motor Control Peripheral PSC (Power Stage Controller) with complementary PWM —
LIN Interface Hardware LIN controller (LIN 2.0) —
Timers/Counters Two 16-bit timer/counters with compare and PWM —
Instructions 131 instructions, most single-cycle —
Oscillator Type Internal —
Boîtier 32-TQFP (7x7 mm, 0.8 mm pitch) 32-TQFP (7 x 7 mm)
Température de fonctionnement -40C to +125C [DATA_NEEDED: operating temperature range]
Life Cycle Stage ACTIVE ACTIVE
Max CPU Clock — 16 MHz
Tension d'alimentation — 2.7 V to 5.5 V
Largeur du bus de données — 8 Bit
CAN Controller — Yes (2.0A/B, six message objects)
LIN Controller — Yes
Power Stage Controller — Yes (multi-channel PWM, motor control)
Debug Interface — JTAG (on-chip debug)
Type de montage — Surface Mount
GPIO Count — 53 per digiChips summary (verify for 32-pin TQFP package)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis