ATMEGA8L-8PI vs ATMEGA88V-10PU Comparaison

Comparaison détaillée côte à côte de ATMEGA8L-8PI par Microchip Technology et ATMEGA88V-10PU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA8L-8PI ATMEGA8L-8PI - 8MHz AVR 8KB Flash MCU DIP-28 | Microchip

ATMEGA8L-8PI - 8MHz AVR 8KB Flash MCU DIP-28 | Microchip

ATMEGA8L-8PI Obsolete
Microchip Technology
ATMEGA88V-10PU ATMEGA88V-10PU - 8KB AVR MCU 10MHz 5V PDIP-28 | Microchip

ATMEGA88V-10PU - 8KB AVR MCU 10MHz 5V PDIP-28 | Microchip

ATMEGA88V-10PU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA8L-8PI ATMEGA88V-10PU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Obsolete Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,80 $1,30
Core Architecture 8-bit AVR RISC —
Flash Program Memory 8 KB (4K x 16) —
SRAM 1 KB 1 KB
EEPROM 512 bytes 512 B
Fréquence d'horloge maximale 8 MHz —
Supply Voltage Range 2.7 V to 5.5 V 1.8 V to 5.5 V
ADC Resolution 10-bit —
ADC Channels 6 or 8 multiplexed channels —
Timers 2 x 8-bit, 1 x 16-bit —
PWM Channels 3 PWM channels —
Serial Interfaces USART, SPI, TWI (I2C) —
Instructions 130 powerful instructions, most single-cycle 130 powerful instructions, most single-cycle
General Purpose Registers 32 —
In-System Programming Yes (8 KB self-programming ISP flash) Yes (ISP, read-while-write)
Température de fonctionnement -40C to +85C (industrial, I suffix) —
Boîtier 28-pin PDIP (P suffix) 28-PDIP
Type de montage Through-Hole Through Hole
Brown-Out Detector Programmable BOD —
Internal Oscillator Calibrated internal RC oscillator —
Statut RoHS [DATA_NEEDED: RoHS status] —
Core Processor — AVR 8-bit RISC
Core Size — 8-Bit
Max Clock Speed — 10 MHz
Flash Memory — 8 KB (4K x 16) ISP Flash
General Purpose I/O — 23 lines
Working Registers — 32 x 8-bit
Timers/Counters — 3 flexible timer/counters with compare modes
Communication Interfaces — USART, SPI, Two-Wire (I2C)
ADC — 10-bit
On-Chip Debug — debugWIRE
Low Power Technology — picoPower
Speed Grade — -10 (10 MHz)
Throughput — 1 MIPS per MHz

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis