ATSAM3U1EA-CU vs ATSAM3U1EA-AU Comparaison

Comparaison détaillée côte à côte de ATSAM3U1EA-CU par Microchip Technology et ATSAM3U1EA-AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATSAM3U1EA-CU ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU

ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU

ATSAM3U1EA-CU ✓ Actif
Microchip Technology
ATSAM3U1EA-AU ATSAM3U1EA-AU - 96MHz Cortex-M3 MCU | Microchip | Industrial Control

ATSAM3U1EA-AU - 96MHz Cortex-M3 MCU | Microchip | Industrial Control

ATSAM3U1EA-AU ✓ Actif

Comparaison des spécifications

Paramètre ATSAM3U1EA-CU ATSAM3U1EA-AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,00 $0,00
Processor Core ARM Cortex-M3, 32-bit RISC —
Maximum Operating Frequency 96 MHz —
Embedded Flash Memory 64 KB 64 KB (64K x 8)
SRAM 20 KB 20 KB
Supply Voltage Range 1.62 V to 3.6 V —
Boîtier 144-BGA (13x13) 144-LQFP, 20 x 20 mm
Package Type Surface-mount LFBGA —
Plage de température de fonctionnement -40°C to +85°C —
USB High-speed USB device port with embedded transceiver High Speed USB Device Port with embedded transceiver is listed for the SAM3U family
Memory Card Interface High-speed MCI for SDIO, SD, and MMC —
DMA Supported —
PWM Supported —
Watchdog Timer Supported —
I2S Supported —
ADC Two 10-bit and two 12-bit ADC groups —
Instruction Set Thumb-2 instruction set Thumb-2
Memory Protection Unit MPU Supported
Statut RoHS [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — 32-bit ARM Cortex-M3 Flash microcontroller
Maximum CPU Frequency — 96 MHz
CPU Core — ARM Cortex-M3 revision 2.0
Architecture — 32-bit single-core RISC
Tension d'alimentation de fonctionnement — 1.62 V to 3.6 V
Flash Access — 128-bit wide access; memory accelerator and dual bank are listed for the SAM3U family
External Bus — Supported by the SAM3U family
MCI Interface — High Speed MCI for SDIO/SD/MMC is listed for the SAM3U family
Type de montage — Surface mount
Lifecycle Stage — Active

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis