ATSAM4S8CA-CU vs ATSAM4S4CA-CU Comparaison
Comparaison détaillée côte à côte de ATSAM4S8CA-CU par Microchip Technology et ATSAM4S4CA-CU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ ActifMicrochip Technology
ATSAM4S4CA-CU - 120MHz Cortex-M4 MCU 256KB Flash | Microchip
ATSAM4S4CA-CU ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4S8CA-CU | ATSAM4S4CA-CU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,18 | $3,45 |
| Core Architecture | ARM Cortex-M4 | ARM Cortex-M4 with FPU and DSP instructions |
| Core Width | 32-bit | — |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | 256 KB (256K x 8) |
| SRAM | 128 KB | 64 KB |
| Instruction Cache | 2 KB | — |
| DSP Extensions | Yes (single-cycle MAC, hardware multiply) | — |
| Memory Protection Unit (MPU) | Yes | — |
| Instruction Set | Thumb-2, ARM Cortex-M4 | — |
| Supply Voltage (Vcc/Vdd) | 1.62 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C (Industrial) | — |
| Boîtier | 100-pin TFBGA (9x9 mm) | 100-ball TFBGA (9x9 mm) |
| External Bus Interface (EBI) | 16-bit (SDRAM/SRAM/NAND/NOR) | Supports SRAM, PSRAM, NOR Flash, NAND Flash, LCD modules |
| USB | USB 2.0 Full-Speed, on-chip transceiver | — |
| CAN | CAN 2.0A/B | — |
| ADC | 12-bit | 12-bit successive approximation |
| Active Current | Approx. 30 mA at 100 MHz (per datasheet) | — |
| Back-up Mode Current (RTC, 1.8 V) | 3 uA | — |
| Pin-to-Pin Compatibility | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL Level] | 3 (per JEDEC J-STD-020, reflow up to 260 C) |
| Statut RoHS | Compliant (per Heisener listing) | Compliant |
| Fréquence d'horloge maximale | — | 120 MHz |
| Supply Voltage (VDDIO/VDDANA) | — | 1.2 V core / 3.3 V I/O (per datasheet) |
| Plage de température de fonctionnement | — | -40 C to +85 C (industrial) |
| USB Interface | — | USB 2.0 Full-Speed Device with embedded transceiver |
| Touch Library Support | — | Microchip QTouch capacitive touch (buttons, sliders, wheels) |
| Communication Peripherals | — | USART, SPI, TWI (I2C), HS USB |
| Timers/PWM | — | 16-bit and 32-bit timers with PWM channels |
| Lead-Free | — | Yes (Green / Pb-free) |
| Product Family Pin Compatibility | — | Pin-to-pin compatible with SAM7S, SAM3N, SAM3S, SAM4N devices |