ATSAM4S8CA-CUR vs ATSAM4S8CA-CU Comparaison
Comparaison détaillée côte à côte de ATSAM4S8CA-CUR par Microchip Technology et ATSAM4S8CA-CU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4S8CA-CUR - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CUR ✓ ActifMicrochip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4S8CA-CUR | ATSAM4S8CA-CU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,05 | $6,18 |
| Core | ARM Cortex-M4 with FPU | — |
| Core Architecture | ARMv7-M | ARM Cortex-M4 |
| Maximum Clock Speed | 120 MHz | 120 MHz |
| Program Memory (Flash) | 512 KB | 512 KB (512K x 8) |
| SRAM | 128 KB | 128 KB |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| Température de fonctionnement | -40C to +85C (Industrial) | -40 C to +85 C (Industrial) |
| Boîtier | 100-TFBGA (9x9 mm) | 100-pin TFBGA (9x9 mm) |
| Type de montage | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed with on-chip transceiver | USB 2.0 Full-Speed, on-chip transceiver |
| CAN | Up to 2 CAN 2.0B controllers | CAN 2.0A/B |
| ADC | 10-bit ADC | 12-bit |
| DMA Channels | 12 | — |
| External Bus Interface | Yes (EBI) | — |
| Active Power (typ) | 30 mA at 100 MHz | — |
| Back-up Mode Current | 3 uA at 1.8 V (RTC running) | — |
| Statut RoHS | Compliant | Compliant (per Heisener listing) |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL Level] |
| AES Hardware Accelerator | Not present on S8 variant | — |
| Series | SAM4S (pin-to-pin with SAM4N/SAM3S/SAM3N/SAM7S) | — |
| Core Width | — | 32-bit |
| Instruction Cache | — | 2 KB |
| DSP Extensions | — | Yes (single-cycle MAC, hardware multiply) |
| Memory Protection Unit (MPU) | — | Yes |
| Instruction Set | — | Thumb-2, ARM Cortex-M4 |
| Supply Voltage (Vcc/Vdd) | — | 1.62 V to 3.6 V |
| External Bus Interface (EBI) | — | 16-bit (SDRAM/SRAM/NAND/NOR) |
| Active Current | — | Approx. 30 mA at 100 MHz (per datasheet) |
| Back-up Mode Current (RTC, 1.8 V) | — | 3 uA |
| Pin-to-Pin Compatibility | — | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) |