ATSAM4S8CB-AN vs ATSAM4S8CA-CFN Comparaison
Comparaison détaillée côte à côte de ATSAM4S8CB-AN par Microchip Technology et ATSAM4S8CA-CFN par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4S8CB-AN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
ATSAM4S8CB-AN ✓ ActifMicrochip Technology
ATSAM4S8CA-CFN - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip
ATSAM4S8CA-CFN ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4S8CB-AN | ATSAM4S8CA-CFN |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,20 | $4,80 |
| Core Architecture | ARM Cortex-M4 (32-bit RISC) | ARM Cortex-M4 with FPU |
| Fréquence d'horloge maximale | 120 MHz | — |
| Flash Memory | 512 KB | — |
| SRAM | 128 KB | 128 KB |
| Supply Voltage Range | 1.62 V to 3.6 V | — |
| Plage de température de fonctionnement | -40C to +105C (extended temp) | — |
| Boîtier | 100-pin LQFP (14x14 mm) | 100-ball VFBGA (7x7 mm) |
| Type de montage | Surface Mount | Surface Mount (BGA) |
| ADC | 10-bit, up to 1 Msps | 12-bit, up to 16 channels, up to 1 MSps |
| USB | USB 2.0 Full-Speed Device/Host | USB 2.0 High-Speed Device with on-chip PHY |
| CAN Controllers | 2 | — |
| UART / SPI / I2C | 3 UART / 2 SPI / 2 I2C | — |
| Peripheral Touch Controller | Yes (PTC) | — |
| External Bus Interface | Yes (EBI) | — |
| DMA Channels | Peripheral DMA controller | — |
| Power Consumption | 200 uA/MHz dynamic, 30 mA @ 100 MHz, 3 uA back-up (RTC) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | ROHS3 Compliant | Compliant |
| Lead-Free | Yes | Yes |
| Maximum Clock Speed | — | 120 MHz |
| Program Memory (Flash) | — | 512 KB (512K x 8) |
| Supply Voltage (VDDIO/VDDCORE) | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| CAN | — | 2x CAN 2.0A/B controllers |
| SDIO/MMC | — | Yes, High-Speed SDIO/MMC |
| Timers | — | Three 16-bit timers, one 16-bit PWM timer, one 24-bit counter |
| PWM Channels | — | 4 channels (16-bit) |
| Communication Peripherals | — | USART, UART, SPI, TWI (I2C), HS USB |
| Hardware Cryptography | — | AES, TRNG |
| Unique Device ID | — | 128-bit |