ATSAM4S8CB-CFNR vs ATSAM4SA16CA-CU Comparaison
Comparaison détaillée côte à côte de ATSAM4S8CB-CFNR par Microchip Technology et ATSAM4SA16CA-CU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4S8CB-CFNR - 120MHz Cortex-M4 MCU, 512KB Flash, VFBGA-100 | Microchip
ATSAM4S8CB-CFNR ✓ ActifMicrochip Technology
ATSAM4SA16CA-CU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SA16CA-CU ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4S8CB-CFNR | ATSAM4SA16CA-CU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,85 | $5,39 |
| Core Architecture | ARM Cortex-M4 (ARMv7-M) | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Clock | 120 MHz | — |
| Performance | 1.26 DMIPS/MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | 1 MB (1024 KB) |
| Data Memory (SRAM) | 128 KB | — |
| Boîtier | 100-VFBGA (7x7 mm), 0.5 mm pitch | 100-pin TFBGA (9x9 mm) |
| Supply Voltage (VDDIN) | 1.62 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C (Industrial) | -40C to +85C (Industrial) |
| ADC | 10-bit, up to 16 channels, 1 MSPS | — |
| DAC | 12-bit, 1 channel | — |
| USB | USB 2.0 Full-Speed Device, on-chip transceiver | — |
| CAN | 1x CAN 2.0A/B controller | — |
| UART/USART | Up to 5 channels | — |
| SPI | Up to 3 controllers | — |
| I2C (TWI) | Up to 3 channels | — |
| Timers | 16-bit TC channels, 32-bit RTC | — |
| Memory Protection | MPU (8 regions) | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount (BGA) | Surface Mount |
| Bit Width | — | 32-bit |
| Maximum CPU Frequency | — | 120 MHz |
| SRAM | — | 160 KB |
| Instruction Cache | — | 2 KB |
| MPU (Memory Protection Unit) | — | Yes |
| GPIO Lines | — | 79 |
| Tension d'alimentation | — | 1.2 V core / 3.3 V I/O (typical) |
| External Bus Interface | — | 8-bit data, 24-bit address |
| ADC Resolution | — | 12-bit |
| DAC Resolution | — | 12-bit |
| DMA Channels | — | Multi-channel DMA + Peripheral DMA Controller (PDC) |
| Communication Interfaces | — | USB 2.0 FS, EMAC 10/100, 4x USART, 3x TWI, 2x SPI, 1x HS-SPI |
| Instruction Set | — | Thumb-2, DSP extensions |
| Pin-to-Pin Compatibility | — | SAM3N, SAM3S (64/100-pin), SAM7S legacy |