ATSAM4SA16CA-CU vs ATSAM4S8CB-CFN Comparaison
Comparaison détaillée côte à côte de ATSAM4SA16CA-CU par Microchip Technology et ATSAM4S8CB-CFN par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4SA16CA-CU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SA16CA-CU ✓ ActifMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4SA16CA-CU | ATSAM4S8CB-CFN |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,39 | $4,74 |
| Core Architecture | ARM Cortex-M4 with FPU and DSP | ARM 32-bit RISC |
| Bit Width | 32-bit | — |
| Maximum CPU Frequency | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1024 KB) | 512 KB (512K x 8) |
| SRAM | 160 KB | 128 KB |
| Instruction Cache | 2 KB | — |
| MPU (Memory Protection Unit) | Yes | — |
| GPIO Lines | 79 | — |
| Boîtier | 100-pin TFBGA (9x9 mm) | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| Type de montage | Surface Mount | Surface Mount (BGA) |
| Température de fonctionnement | -40C to +85C (Industrial) | — |
| Tension d'alimentation | 1.2 V core / 3.3 V I/O (typical) | — |
| External Bus Interface | 8-bit data, 24-bit address | 16-bit Static Memory Controller (EBI) |
| ADC Resolution | 12-bit | — |
| DAC Resolution | 12-bit | — |
| DMA Channels | Multi-channel DMA + Peripheral DMA Controller (PDC) | — |
| Communication Interfaces | USB 2.0 FS, EMAC 10/100, 4x USART, 3x TWI, 2x SPI, 1x HS-SPI | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| Instruction Set | Thumb-2, DSP extensions | — |
| Statut RoHS | Compliant | Compliant |
| Pin-to-Pin Compatibility | SAM3N, SAM3S (64/100-pin), SAM7S legacy | — |
| Core | — | ARM Cortex-M4 with FPU |
| Fréquence d'horloge maximale | — | 120 MHz |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| USB | — | USB 2.0 Full-Speed Device with on-chip transceiver |
| CAN | — | 2x CAN 2.0A/B controllers |
| ADC | — | 12-bit, up to 16 channels, 1 Msps |
| DAC | — | 2x 12-bit DAC |
| Timers | — | Multiple 16-bit and 32-bit timers, PWM, RTC |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |