ATSAM4SD32CA-CU vs ATSAM4S8CB-CFN Comparaison
Comparaison détaillée côte à côte de ATSAM4SD32CA-CU par Microchip Technology et ATSAM4S8CB-CFN par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4SD32CA-CU - 120MHz Cortex-M4 MCU 2MB Flash 100-TFBGA | Microchip
ATSAM4SD32CA-CU ✓ ActifMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4SD32CA-CU | ATSAM4S8CB-CFN |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,62 | $4,74 |
| Core Architecture | ARM Cortex-M4 with FPU | ARM 32-bit RISC |
| Fréquence d'horloge maximale | 120 MHz | 120 MHz |
| Instruction Cache | 2 KB | — |
| Program Memory (Flash) | 2 MB (2M x 8) | 512 KB (512K x 8) |
| SRAM | 160 KB | 128 KB |
| Supply Voltage Range | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Boîtier | 100-ball TFBGA (9x9 mm) | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| Plage de température de fonctionnement | -40 C to +85 C (industrial) | — |
| ADC | 10-bit, up to 16 channels, 1 MSps | 12-bit, up to 16 channels, 1 Msps |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG | — |
| CAN | 2 x CAN 2.0A/B | 2x CAN 2.0A/B controllers |
| USART | 3 x USART | — |
| TWI (I2C-compatible) | 2 x TWI | — |
| SPI | 2 x SPI | — |
| Memory Protection Unit (MPU) | Yes | — |
| DSP Extensions | Yes (single-precision FPU + MAC) | — |
| Pin-to-Pin Compatibility | SAM3N, SAM3S, SAM7S legacy 64/100-pin variants | — |
| Type de montage | Surface Mount (TFBGA) | Surface Mount (BGA) |
| Statut RoHS | Compliant | Compliant |
| Core | — | ARM Cortex-M4 with FPU |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| USB | — | USB 2.0 Full-Speed Device with on-chip transceiver |
| DAC | — | 2x 12-bit DAC |
| Timers | — | Multiple 16-bit and 32-bit timers, PWM, RTC |
| Communication Interfaces | — | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| External Bus Interface | — | 16-bit Static Memory Controller (EBI) |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |