ATSAMA5D26A-CU vs ATSAMA5D22A-CU Comparaison
Comparaison détaillée côte à côte de ATSAMA5D26A-CU par Microchip Technology et ATSAMA5D22A-CU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMA5D26A-CU - Cortex-A5 MPU 500MHz | 289-LFBGA | Microchip
ATSAMA5D26A-CU ✓ ActifMicrochip Technology
ATSAMA5D22A-CU - 500MHz Cortex-A5 MPU, 196-TFBGA | Microchip
ATSAMA5D22A-CU ✓ ActifComparaison des spécifications
| Paramètre | ATSAMA5D26A-CU | ATSAMA5D22A-CU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $16,10 | $8,20 |
| Core | Arm Cortex-A5 (single-core) | ARM Cortex-A5 (32-bit, single-core) |
| Maximum CPU Clock | 500 MHz | 500 MHz |
| Architecture | ARMv7-A | — |
| Internal SRAM | 128 KB | — |
| External Memory Bus | DDR2/DDR3L/LPDDR2/LPDDR3, 16-bit | — |
| Boot Memory | QSPI, e.MMC, NAND Flash | — |
| Boîtier | 289-LFBGA, 14x14 mm, 0.8 mm pitch | 196-TFBGA (11x11 mm, 0.8 mm pitch) |
| Température de fonctionnement | -40C to +85C (industrial) | -40C to +85C (industrial) |
| I/O Voltage Rails | 1.2 V, 1.8 V, 3.3 V | — |
| USB Ports | 3x USB 2.0 (1 HSIC, 2 host/device) | — |
| Ethernet | 10/100 Mbps MAC (GMII/RMII/MII) | 10/100 Mbps (1 port) |
| CAN | 2x CAN-FD | — |
| Display Controller | LCD with resistive/capacitive touchscreen I/F | LCD controller supporting up to WXGA |
| Cryptography | AES, SHA-256, TRNG, secure boot | AES, SHA, TRNG accelerators |
| Type de montage | Surface Mount | Surface Mount (BGA) |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | Compliant |
| Series | — | SAMA5D2 |
| NEON SIMD Engine | — | Yes |
| Floating Point Unit | — | Yes |
| On-chip SRAM | — | 128 KB |
| Graphics Acceleration | — | Yes (2D hardware) |
| External Memory Support | — | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | — | USB 2.0 + HSIC |
| Touch Controller | — | Peripheral Touch Controller (PTC) integrated |
| Audio Subsystem | — | Embedded (I2S, SSC, Class-D support) |
| I/O Voltage | — | 3.3 V |
| Core Voltage | — | 1.2 V / 1.8 V / 3.3 V |
| Backup Mode Current | — | 5 uA (typical, per datasheet) |