ATSAMA5D35-EK vs ATSAMA5D2B-XULT Comparaison
Comparaison détaillée côte à côte de ATSAMA5D35-EK par Microchip Technology et ATSAMA5D2B-XULT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ ActifMicrochip Technology
ATSAMA5D2B-XULT - SAMA5D2 Xplained Ultra Kit | Microchip
ATSAMA5D2B-XULT ObsoleteComparaison des spécifications
| Paramètre | ATSAMA5D35-EK | ATSAMA5D2B-XULT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Development Boards | Development Boards |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $629,00 | $142,50 |
| Product Type | MPU Evaluation Board / Development Kit | Embedded MPU Evaluation Board / Xplained Ultra Kit |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | — |
| Maximum CPU Clock | 536 MHz | — |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | — |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | 10/100 Mbps with on-board PHY |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | — |
| CAN | 2x CAN-FD controllers | — |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | — |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Featured MPU | — | ATSAMA5D27B (SAMA5D2 family, ARM Cortex-A5) |
| MPU Core | — | ARM Cortex-A5, 32-bit, single-core |
| MPU Clock Speed | — | Up to 500 MHz |
| MPU Package (SiP) | — | 289-ball BGA |
| On-Package Memory | — | 128 MB DDR2 |
| External Flash | — | QSPI NOR flash (on-board) |
| USB Interfaces | — | USB 2.0 host + USB 2.0 device |
| SD/MMC | — | microSD socket + 4-bit SD/MMC interface |
| CAN Interfaces | — | 2 x CAN-FD |
| Expansion | — | Arduino R3, Xplained Pro, mikroBUS |
| Display | — | 24-bit TFT LCD connector |
| Pre-flashed OS | — | Linux demonstration image |