ATSAMA5D35-EK vs ATSAMA5D3-XPLD Comparaison
Comparaison détaillée côte à côte de ATSAMA5D35-EK par Microchip Technology et ATSAMA5D3-XPLD par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ ActifMicrochip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ Dernier achatComparaison des spécifications
| Paramètre | ATSAMA5D35-EK | ATSAMA5D3-XPLD |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Development Boards | Development Boards |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $629,00 | $105,90 |
| Product Type | MPU Evaluation Board / Development Kit | Embedded Evaluation Board (Xplained Kit) |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | — |
| Maximum CPU Clock | 536 MHz | 536 MHz |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | — |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | 2x 10/100/1000 GMAC |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | 1x USB 2.0 Device, 2x USB 2.0 Host |
| CAN | 2x CAN-FD controllers | 2x CAN 2.0B |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | — |
| Statut RoHS | Compliant | — |
| Lead-Free | Yes | — |
| Target MPU | — | ATSAMA5D36 (ARM Cortex-A5) |
| Core | — | ARM Cortex-A5 with FPU |
| On-chip SRAM | — | 128 KB |
| Cache (I/D) | — | 32 KB each |
| External Memory Interface | — | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI |
| Graphics Output | — | HDMI + parallel LCD |
| Storage | — | microSD slot + NAND Flash on-board |
| Expansion Headers | — | Arduino R3 + Xplained extension header |
| Debug Interface | — | On-board J-Link-OB (JTAG + SWD) + serial console |
| Operating System Support | — | Linux Mainline, Yocto Project, bare-metal C examples |
| Included Accessories | — | micro-AB to Type-A USB cable |
| Température de fonctionnement | — | 0C to +70C (commercial evaluation use) |
| Compliance | — | RoHS Compliant |