ATSAMA5D35-EK vs ATSAMA5D36-EK Comparaison
Comparaison détaillée côte à côte de ATSAMA5D35-EK par Microchip Technology et ATSAMA5D36-EK par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ ActifMicrochip Technology
ATSAMA5D36-EK - SAMA5D36 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D36-EK ⚠ Dernier achatComparaison des spécifications
| Paramètre | ATSAMA5D35-EK | ATSAMA5D36-EK |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Development Boards | Development Boards |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $629,00 | $479,20 |
| Product Type | MPU Evaluation Board / Development Kit | Evaluation Board / Development Kit |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | — |
| Maximum CPU Clock | 536 MHz | — |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | 128 KB |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | MII / RMII (dual capable) |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | USB Host + USB Device ports |
| CAN | 2x CAN-FD controllers | — |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | — |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Supported MPU | — | Atmel SAMA5D36 (ARM Cortex-A5) |
| CPU Core | — | ARM Cortex-A5 with FPU |
| Maximum CPU Frequency | — | 536 MHz |
| On-chip Cache | — | 32 KB I-cache + 32 KB D-cache |
| External DRAM | — | 512 MB DDR2 / LPDDR |
| EEPROM | — | 64 KB |
| NAND Flash | — | 4 MB |
| NOR Flash | — | 16 MB |
| SPI DataFlash | — | 256 MB |
| Display Interface | — | TFT LCD connector |
| Camera Interface | — | CMOS camera connector |
| Boot / Programming | — | SAM-BA bootloader + JTAG |
| Supported Software | — | SAMA5D3 Softpack, Linux, Qt demos |
| Target Series | — | SAMA5D3 (SAMA5D31/D33/D34/D36) |