ATSAMD20G18A-ANT vs ATSAMD20J15A-ANT Comparaison

Comparaison détaillée côte à côte de ATSAMD20G18A-ANT par Microchip Technology et ATSAMD20J15A-ANT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATSAMD20G18A-ANT ATSAMD20G18A-ANT - ARM Cortex-M0+ 48MHz 256KB Flash MCU | Microchip

ATSAMD20G18A-ANT - ARM Cortex-M0+ 48MHz 256KB Flash MCU | Microchip

ATSAMD20G18A-ANT ✓ Actif
Microchip Technology
ATSAMD20J15A-ANT ATSAMD20J15A-ANT - 32KB Flash Cortex-M0+ MCU, 64-TQFP | Microchip

ATSAMD20J15A-ANT - 32KB Flash Cortex-M0+ MCU, 64-TQFP | Microchip

ATSAMD20J15A-ANT ✓ Actif

Comparaison des spécifications

Paramètre ATSAMD20G18A-ANT ATSAMD20J15A-ANT
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,55 $1,65
Core Architecture ARM Cortex-M0+ (32-bit) —
Maximum CPU Frequency 48 MHz 48 MHz
CoreMark/MHz 2.46 —
Program Memory (Flash) 256 KB (256K x 8) 32 KB (32K x 8)
Data Memory (SRAM) 32 KB 4 KB
Operating Voltage Range 1.62 V to 3.63 V 1.62 V to 3.63 V
Boîtier 48-pin TQFP (7 x 7 mm) 64-TQFP (10x10 mm), Tape and Reel
Type de montage Surface Mount Surface Mount
Plage de température de fonctionnement -40 C to +105 C -40°C to +105°C (Industrial, "ANT" suffix)
ADC 12-bit, up to 1 MSPS, up to 20 channels 12-bit, up to 20 channels ([DATA_NEEDED: exact channel count for 64-pin TQFP])
USB Interface USB 2.0 Full-Speed Device with on-chip transceiver —
SERCOM Modules 6 (configurable as UART / SPI / I2C) —
I2C Interfaces 2 —
Timers/Counters Six 16-bit TC channels TC x5, TCC x2 ([DATA_NEEDED: exact count])
RTC 16-bit RTC with calendar mode Yes, with 32.768 kHz oscillator support
Statut RoHS Compliant —
Lead-Free / Halogen-Free Yes (per Mouser GREEN marking) —
Core — ARM Cortex-M0+ (32-bit)
Series — SAM D20J (Atmel SMART)
I/O Pins — [DATA_NEEDED: number of GPIO]
DAC — 10-bit, 1 channel, 350 ksps
Peripheral Touch Controller (PTC) — 256-channel, supports buttons/sliders/wheels
Communication Interfaces — 6x SERCOM (UART/SPI/I2C configurable), I2S
DMA Channels — [DATA_NEEDED: DMA channel count]
Niveau MSL — MSL3 ([DATA_NEEDED: floor life])
Lead-Free / RoHS — Lead-free, RoHS compliant per Mouser listing ("GREEN")

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis