ATSAMD20J17A-CUT vs ATSAMD21J17A-CUT Comparaison

Comparaison détaillée côte à côte de ATSAMD20J17A-CUT par Microchip Technology et ATSAMD21J17A-CUT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATSAMD20J17A-CUT ATSAMD20J17A-CUT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

ATSAMD20J17A-CUT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

ATSAMD20J17A-CUT ✓ Actif
Microchip Technology
ATSAMD21J17A-CUT ATSAMD21J17A-CUT - SAM D21J Cortex-M0+ MCU 128KB Flash | Microchip

ATSAMD21J17A-CUT - SAM D21J Cortex-M0+ MCU 128KB Flash | Microchip

ATSAMD21J17A-CUT ✓ Actif

Comparaison des spécifications

Paramètre ATSAMD20J17A-CUT ATSAMD21J17A-CUT
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,05 $2,48
Core ARM Cortex-M0+ (32-bit) —
Series SAM D20J —
Maximum CPU Clock 48 MHz —
CoreMark Performance 2.14 CoreMark/MHz —
Program Memory 128 KB Flash —
Data Memory 16 KB SRAM —
Tension d'alimentation 1.62 V to 3.63 V —
Température de fonctionnement -40C to +85C (Industrial) —
Boîtier 64-ball UFBGA (5x5 mm) 64-UFBGA (5x5 mm)
GPIO Count Up to 52 —
ADC 12-bit, up to 350 ksps, up to 14 channels 12-bit, up to 350 ksps, up to 20 channels
DAC 10-bit, 1 channel 10-bit, 1 channel
Communication Interfaces Up to 6 SERCOM (configurable as UART/SPI/I2C) —
RTC Yes, 32-bit RTC with calendar —
DMA Channels 8 channels 12
Touch Controller 256-channel PTC (Peripheral Touch Controller) —
Event System 24 channels —
Low-Power Modes IDLE, STANDBY, BACKUP —
Type de montage Surface Mount (BGA) Surface Mount
Statut RoHS Compliant Compliant
Niveau MSL [DATA_NEEDED: MSL rating] —
Product Family — SAM D21J
Core Architecture — ARM Cortex-M0+
Core Width — 32-bit
Maximum CPU Frequency — 48 MHz
CoreMark/MHz — 2.46
Program Memory (Flash) — 128 KB (128K x 8)
SRAM — 16 KB
Operating Voltage Range — 1.62 V to 3.63 V
Plage de température de fonctionnement — -40 C to +85 C
USB Interface — USB 2.0 Full-Speed with on-chip transceiver
Analog Comparators — 2
SERCOM — Up to 6 configurable serial peripherals
Peripheral Touch Controller — Supported (PTC)
Hardware Cryptography — AES-256, TRNG
Lead-Free — Yes

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis