ATSAMD21E16C-UUTB4 vs ATSAMC21N18A-ANT Comparaison
Comparaison détaillée côte à côte de ATSAMD21E16C-UUTB4 par Microchip Technology et ATSAMC21N18A-ANT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21E16C-UUTB4 - 48MHz Cortex-M0+ MCU 64KB Flash 35-WLCSP
ATSAMD21E16C-UUTB4 ✓ ActifMicrochip Technology
ATSAMC21N18A-ANT - 48MHz Cortex-M0+ MCU 256KB Flash TQFP-100 | Microchip
ATSAMC21N18A-ANT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21E16C-UUTB4 | ATSAMC21N18A-ANT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,27 | $4,12 |
| Core Architecture | ARM Cortex-M0+ | — |
| Operating Frequency (Max) | 48 MHz | — |
| Program Memory (Flash) | 64 KB | — |
| Data Memory (SRAM) | 8 KB | — |
| Data Width | 32-bit | — |
| Boîtier | 35-WLCSP (2.82 x 2.53 mm) | 100-pin TQFP (14x14 mm) |
| Supply Voltage Range | 1.62 V to 3.63 V | — |
| GPIO Count | 26 (per WLCSP ballout) | Up to 84 |
| ADC | 12-bit, up to 12 channels, 350 kSPS | — |
| DAC | 10-bit, 1 channel | — |
| USB Interface | USB 2.0 Full-Speed with on-chip transceiver | — |
| Serial Interfaces | 2x I2C, 2x SPI, 2x UART, 1x I2S | — |
| Timers | 1x 24-bit + 2x 16-bit + 2x 8-bit TC | — |
| DMA Channels | 12-channel DMAC | 7 |
| Event System Channels | 12 | — |
| Debug Interface | Serial Wire Debug (SWD), 2-pin | — |
| Functional Safety | FuSa (IEC 60730 Class B capable) | — |
| Température de fonctionnement | -40 C to +85 C | -40C to +105C (industrial) |
| Type de montage | Surface Mount (WLCSP) | Surface Mount |
| Statut RoHS | ROHS3 Compliant | Compliant (Green) |
| Core | — | ARM Cortex-M0+ (32-bit, single-core) |
| Maximum CPU Clock | — | 48 MHz |
| Flash Memory | — | 256 KB (in-system self-programmable) |
| EEPROM Emulation Flash | — | 8 KB (independent self-programmable) |
| SRAM | — | 32 KB |
| Supply Voltage (VDD) | — | 2.7 V to 5.5 V |
| Communication Interfaces | — | 6x SERCOM (UART/SPI/I2C), 1x CAN-FD, USB, I2S |
| Analog Peripherals | — | 12-bit ADC, 10-bit DAC, comparators, op-amps, PTC |
| Multipliers | — | Single-cycle hardware multiplier |
| Memory Protection Unit (MPU) | — | Yes |
| Micro Trace Buffer | — | Yes |
| Functional Safety (FuSa) | — | Yes |