ATSAMD21E17L-MN vs ATSAMD21G17L-MNT Comparaison
Comparaison détaillée côte à côte de ATSAMD21E17L-MN par Microchip Technology et ATSAMD21G17L-MNT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21E17L-MN - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21E17L-MN ✓ ActifMicrochip Technology
ATSAMD21G17L-MNT - SAM D21G Cortex-M0+ MCU 128KB Flash 48-QFN | Microchip
ATSAMD21G17L-MNT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21E17L-MN | ATSAMD21G17L-MNT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,85 | $1,45 |
| Core | ARM Cortex-M0+ (32-bit) | — |
| Maximum CPU Clock | 48 MHz | — |
| Performance | 1.25 DMIPS/MHz | — |
| Flash Program Memory | 128 KB (128K x 8) | — |
| SRAM | 16 KB | 16 KB |
| Supply Voltage (VDDIN) | 1.62 V to 3.63 V | — |
| Température de fonctionnement | -40 C to +105 C (Industrial) | -40C to +105C (L-suffix, industrial) |
| Boîtier | 32-pin QFN (5x5 mm) with Exposed Pad | 48-QFN (7x7 mm) with exposed pad |
| I/O Pins | Up to 26 GPIO | — |
| ADC | 12-bit, up to 350 ksps | 12-bit, up to 20 channels, 350 ksps |
| DAC | 10-bit, 1 channel | — |
| Serial Communication (SERCOM) | 6 channels, configurable UART/SPI/I2C | — |
| USB | Full-Speed USB 2.0 Device, on-chip transceiver | USB 2.0 Full-Speed Device, integrated transceiver |
| Timers | TC x3, TCC x3 | — |
| Touch Support | Capacitive touch via PTC | — |
| Event System | 12 channels, inter-peripheral signalling | — |
| Statut RoHS | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Family | — | SAM D21G |
| Series | — | ATSAMD21 |
| Maximum CPU Frequency | — | 48 MHz |
| Flash Memory | — | 128 KB (128K x 8) |
| Read-While-Write Flash Partition | — | 4 KB |
| Supply Voltage (VDD) | — | 1.62 V to 3.63 V |
| I/O Voltage | — | 1.62 V to 3.63 V (same as VDD) |
| GPIO Count | — | Up to 38 |
| Analog Comparators | — | 2 |
| SERCOM Modules | — | 6 (configurable as UART/SPI/I2C) |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch sensing) |
| DMA Channels | — | 6 |
| Timers/Counters | — | TC0..TC5 + TCC0..TCC1, multiple PWM outputs |
| Type de montage | — | Surface Mount, Tape and Reel (MNT suffix) |
| Lead Finish | — | Matte tin (lead-free, GREEN) |
| Niveau MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |