ATSAMD21G16L-MNT vs ATSAMD21G17L-MNT Comparaison
Comparaison détaillée côte à côte de ATSAMD21G16L-MNT par Microchip Technology et ATSAMD21G17L-MNT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21G16L-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD21G16L-MNT ✓ ActifMicrochip Technology
ATSAMD21G17L-MNT - SAM D21G Cortex-M0+ MCU 128KB Flash 48-QFN | Microchip
ATSAMD21G17L-MNT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21G16L-MNT | ATSAMD21G17L-MNT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,85 | $1,45 |
| Core Architecture | ARM Cortex-M0+ (32-bit) | ARM Cortex-M0+ (32-bit) |
| Family | SAM D21G (Functional Safety / FuSa) | SAM D21G |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Memory | 64 KB (64K x 8) | 128 KB (128K x 8) |
| SRAM | 8 KB | 16 KB |
| Supply Voltage (VDD) | 1.6 V to 3.6 V | 1.62 V to 3.63 V |
| Température de fonctionnement | -40 °C to +105 °C | -40C to +105C (L-suffix, industrial) |
| Boîtier | 48-QFN (7x7 mm) with exposed pad | 48-QFN (7x7 mm) with exposed pad |
| Type de montage | Surface Mount | Surface Mount, Tape and Reel (MNT suffix) |
| Niveau MSL | 3 | [DATA_NEEDED: MSL moisture sensitivity level] |
| GPIOs | Up to 38 | — |
| Communication Interfaces | Up to 6x SERCOM (UART/SPI/I²C), I²S, USB 2.0 FS Device/Host | — |
| ADC | 12-bit, up to 14 channels | 12-bit, up to 20 channels, 350 ksps |
| DAC | 10-bit, 1 channel | — |
| Debug Interface | Serial Wire Debug (SWD), 2-pin | — |
| DMA | 12-channel DMAC + 12-channel Event System | — |
| Statut RoHS | Compliant | Compliant |
| Series | — | ATSAMD21 |
| Read-While-Write Flash Partition | — | 4 KB |
| I/O Voltage | — | 1.62 V to 3.63 V (same as VDD) |
| GPIO Count | — | Up to 38 |
| Analog Comparators | — | 2 |
| SERCOM Modules | — | 6 (configurable as UART/SPI/I2C) |
| USB | — | USB 2.0 Full-Speed Device, integrated transceiver |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch sensing) |
| DMA Channels | — | 6 |
| Timers/Counters | — | TC0..TC5 + TCC0..TCC1, multiple PWM outputs |
| Lead Finish | — | Matte tin (lead-free, GREEN) |