ATSAMD21G17L-MFT vs ATSAMD21G16B-MFT Comparaison
Comparaison détaillée côte à côte de ATSAMD21G17L-MFT par Microchip Technology et ATSAMD21G16B-MFT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21G17L-MFT - 128KB Flash Cortex-M0+ MCU, 48MHz, QFN-48 | Microchip
ATSAMD21G17L-MFT ✓ ActifMicrochip Technology
ATSAMD21G16B-MFT - 48MHz ARM Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD21G16B-MFT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21G17L-MFT | ATSAMD21G16B-MFT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,92 | $1,96 |
| Core Architecture | ARM Cortex-M0+ (32-bit) | ARM Cortex-M0+ (32-bit) |
| CPU Frequency | 48 MHz | — |
| Flash Memory | 128 KB (128K x 8) | — |
| SRAM | 16 KB | 8 KB |
| Operating Voltage | 1.62 V to 3.63 V | — |
| Température de fonctionnement | -40 C to +125 C (AEC-Q100 Grade 1) | -40 C to +125 C (industrial) |
| Boîtier | 48-pin QFN (7x7 mm) with exposed pad | 48-QFN (7x7 mm) |
| ADC | 12-bit, up to 1 MSPS | 12-bit, up to 350 ksps |
| SERCOM Interfaces | 6 (configurable as UART/SPI/I2C) | — |
| USB Interface | USB 2.0 Full-Speed Device | — |
| I2S Interfaces | 2 | — |
| Timers | TC x 3, TCC x 3, RTC x 1 | — |
| AES Cryptographic Engine | Yes (256-bit) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | Green, RoHS compliant |
| AEC-Q100 Qualified | Yes (Grade 1, lighting variant) | — |
| Debug Interface | SWD (Serial Wire Debug) | 2-pin Serial Wire Debug (SWD) |
| DMA Channels | 12 | 12 |
| GPIOs | 38 | — |
| Maximum CPU Frequency | — | 48 MHz |
| CoreMark Performance | — | 2.46 CoreMark/MHz |
| Program Flash | — | 64 KB (in-system self-programmable) |
| Supply Voltage (VDDIN) | — | 1.62 V to 3.63 V |
| Packaging Type | — | Tape & Reel (MFT suffix) |
| GPIO Count | — | Up to 38 pins |
| DAC | — | 10-bit |
| Analog Comparators | — | 2 |
| SERCOM Modules | — | 6 (configurable UART/SPI/I2C) |
| USB | — | USB 2.0 Full-Speed Device, on-chip transceiver |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch sensing) |
| Functional Safety (FuSa) | — | IEC 60730 class B capable |
| Hardware Multiplier | — | Single-cycle |