ATSAMD21G18A-MF vs ATSAMD21-XPRO Comparaison
Comparaison détaillée côte à côte de ATSAMD21G18A-MF par Microchip Technology et ATSAMD21-XPRO par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21G18A-MF - 48MHz Cortex-M0+ MCU, 256KB Flash | Microchip
ATSAMD21G18A-MF ✓ ActifMicrochip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21G18A-MF | ATSAMD21-XPRO |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Development Boards |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,61 | $36,25 |
| Core | ARM Cortex-M0+ (ARMv6-M) | — |
| Maximum CPU Clock | 48 MHz | — |
| CoreMark Performance | 2.46 CoreMark/MHz | — |
| Flash Memory | 256 KB | — |
| SRAM | 32 KB | 32 KB |
| Supply Voltage Range | 1.62 V to 3.63 V | — |
| Plage de température de fonctionnement | -40 C to +125 C (industrial) | — |
| ADC | 12-bit, 12 channels, up to 350 ksps | — |
| DAC | 10-bit, 1 channel | — |
| SERCOM Channels | 6 (configurable as UART/SPI/I2C) | — |
| I2S Interfaces | 2 | — |
| USB Interface | USB 2.0 Full-Speed device/host/OTG | — |
| Timers/Counters | 8 (including 24-bit TCC) | — |
| Boîtier | 48-pin QFN (7x7 mm) with exposed pad | — |
| Type de montage | Surface Mount | — |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | Evaluation Board (Xplained Pro) |
| Target MCU | — | ATSAMD21J18A |
| Core Processor | — | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | — | 48 MHz |
| Flash Memory (on-chip) | — | 256 KB |
| On-board SPI Flash | — | 1 MB |
| Low-frequency Crystal | — | 32.768 kHz |
| High-frequency Crystal | — | 12 MHz |
| Debug Interface | — | nEDBG (CMSIS-DAP) on-board |
| USB Connectors | — | 1x Micro-B (debug/CDC), 1x Micro-B (target) |
| Extension Headers | — | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) |
| User Inputs | — | 1x mechanical reset button, 1x user touch button |
| User Outputs | — | 1x user LED |
| Arduino-compatible Headers | — | Yes (subset of ATSAMD21J18A I/O) |
| Operating Voltage (target) | — | 3.3 V |
| Board Power Source | — | USB Micro-B |
| Supported IDEs | — | MPLAB X IDE, Atmel Studio 7, Atmel START |
| Form Factor | — | Xplained Pro standard (approx 88 mm x 53 mm) |