ATSAMD21J15B-AUT vs ATSAMD21J16B-AU Comparaison
Comparaison détaillée côte à côte de ATSAMD21J15B-AUT par Microchip Technology et ATSAMD21J16B-AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21J15B-AUT - 32KB Flash 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J15B-AUT ✓ ActifMicrochip Technology
ATSAMD21J16B-AU - SAM D21 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J16B-AU ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21J15B-AUT | ATSAMD21J16B-AU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,40 | $2,75 |
| Core Architecture | ARM Cortex-M0+ (32-bit) | — |
| Fréquence d'horloge maximale | 48 MHz | 48 MHz |
| Program Flash Memory | 32 KB (32K x 8) | — |
| SRAM | 4 KB | — |
| Operating Voltage Range | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| Supply Voltage (typical) | 3.3 V | — |
| Température de fonctionnement | -40 C to +85 C (AUT suffix) | — |
| Boîtier | 64-pin TQFP (10 x 10 mm) | 64-pin TQFP (10x10 mm) |
| Type de montage | Surface Mount | Surface Mount |
| I/O Pins | Up to 52 GPIO | 52 programmable |
| Communication Interfaces | 6x SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device, I2S | — |
| ADC | 12-bit, up to 20 channels, 350 ksps | 12-bit, 8-channel, up to 350 ksps |
| DAC | 10-bit, 1 channel, 350 ksps | 10-bit, 1-channel |
| Timers | TC x3 (16-bit), TCC x2 (24-bit) | 16-bit TC, 8-bit TC, RTC |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | USB 2.0 Full-Speed with OTG |
| Touch | Peripheral Touch Controller (PTC) | — |
| Statut RoHS | Compliant (Green) | Compliant |
| Delivery Form | Tape & Reel (AUT) | — |
| Core | — | ARM Cortex-M0+ (M0+) |
| CPU Architecture | — | 32-bit RISC |
| Program Memory (Flash) | — | 64 KB (64K x 8) |
| Data Memory (SRAM) | — | 8 KB |
| Supply Voltage (nominal) | — | 3.3 V |
| Plage de température de fonctionnement | — | -40 C to +85 C |
| SERCOM | — | 6 configurable (UART/SPI/I2C) |
| DMAC | — | 12-channel |
| Event System | — | 12-channel |
| External Interrupts (EIC) | — | 16 |
| Debug Interface | — | 2-pin Serial Wire Debug (SWD) |
| Niveau MSL | — | 3 (168 hours) |
| Lead-Free | — | Yes |
| Functional Safety | — | FuSa capable |
| Active Current (typ.) | — | 70 uA/MHz |