ATSAMD21J16B-AU vs ATSAMD21J15B-AUT Comparaison
Comparaison détaillée côte à côte de ATSAMD21J16B-AU par Microchip Technology et ATSAMD21J15B-AUT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21J16B-AU - SAM D21 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J16B-AU ✓ ActifMicrochip Technology
ATSAMD21J15B-AUT - 32KB Flash 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J15B-AUT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21J16B-AU | ATSAMD21J15B-AUT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,75 | $2,40 |
| Core | ARM Cortex-M0+ (M0+) | — |
| CPU Architecture | 32-bit RISC | — |
| Fréquence d'horloge maximale | 48 MHz | 48 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) | — |
| Data Memory (SRAM) | 8 KB | — |
| Operating Voltage Range | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| Supply Voltage (nominal) | 3.3 V | — |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10 x 10 mm) |
| I/O Pins | 52 programmable | Up to 52 GPIO |
| ADC | 12-bit, 8-channel, up to 350 ksps | 12-bit, up to 20 channels, 350 ksps |
| DAC | 10-bit, 1-channel | 10-bit, 1 channel, 350 ksps |
| USB | USB 2.0 Full-Speed with OTG | USB 2.0 Full-Speed Device with on-chip transceiver |
| SERCOM | 6 configurable (UART/SPI/I2C) | — |
| Timers | 16-bit TC, 8-bit TC, RTC | TC x3 (16-bit), TCC x2 (24-bit) |
| DMAC | 12-channel | — |
| Event System | 12-channel | — |
| External Interrupts (EIC) | 16 | — |
| Debug Interface | 2-pin Serial Wire Debug (SWD) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | Compliant (Green) |
| Lead-Free | Yes | — |
| Functional Safety | FuSa capable | — |
| Active Current (typ.) | 70 uA/MHz | — |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Program Flash Memory | — | 32 KB (32K x 8) |
| SRAM | — | 4 KB |
| Supply Voltage (typical) | — | 3.3 V |
| Température de fonctionnement | — | -40 C to +85 C (AUT suffix) |
| Communication Interfaces | — | 6x SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device, I2S |
| Touch | — | Peripheral Touch Controller (PTC) |
| Delivery Form | — | Tape & Reel (AUT) |