ATSAMD21J16B-MF vs ATSAMD21J17D-MF Comparaison
Comparaison détaillée côte à côte de ATSAMD21J16B-MF par Microchip Technology et ATSAMD21J17D-MF par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21J16B-MF - ARM Cortex-M0+ 48MHz 64KB Flash MCU | Microchip
ATSAMD21J16B-MF ✓ ActifMicrochip Technology
ATSAMD21J17D-MF - ARM Cortex-M0+ 48MHz 128KB Flash MCU | Microchip
ATSAMD21J17D-MF ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21J16B-MF | ATSAMD21J17D-MF |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,65 | $2,63 |
| Core | ARM Cortex-M0+ (32-bit) | — |
| Series | SAM D21J (FuSa Functional Safety) | — |
| Maximum CPU Frequency | 48 MHz | — |
| CoreMark/MHz | 2.46 | — |
| Program Memory (Flash) | 64 KB (64K x 8) | — |
| SRAM | 8 KB | 16 KB |
| Operating Voltage | 1.62 V to 3.63 V | — |
| Boîtier | 64-pin QFN (9x9 mm) | 64-pin QFN (9x9 mm) with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +125C | — |
| ADC | 12-bit, up to 20 channels, 350 ksps | 12-bit, up to 20 channels |
| DAC | 10-bit, 350 ksps | 10-bit, 1 channel |
| Communication Interfaces | 6x SERCOM (USART/SPI/I2C), USB 2.0 Full-Speed | — |
| GPIO | 52 (approximate, package-dependent) | — |
| Statut RoHS | Compliant (Green) | Compliant (Green) |
| Niveau MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Core Architecture | — | ARM Cortex-M0+ (Armv6-M) |
| Core Bit Width | — | 32-bit |
| Fréquence d'horloge maximale | — | 48 MHz |
| Program Flash Memory | — | 128 KB (128K x 8) |
| Read-While-Write (RWW) Flash Region | — | 4 KB |
| Supply Voltage (VDD) | — | 1.6 V to 3.6 V |
| Absolute Maximum VDD | — | 3.8 V |
| Plage de température de fonctionnement | — | -40 C to +125 C (Extended) |
| USB Interface | — | USB 2.0 Full-Speed Device with on-chip PHY |
| SERCOM Channels | — | 6 (configurable UART/SPI/I2C) |
| AES Engine | — | Yes (hardware crypto accelerator) |
| I2S/SSC Channels | — | 2 |
| Peripheral Touch Controller (PTC) | — | Yes |
| Sleep Modes | — | 8 (with SleepWalking) |
| Functional Safety (FuSa) | — | IEC 60730 Class B support |