ATSAMD21J16B-MFT vs ATSAMD21J16B-AU Comparaison
Comparaison détaillée côte à côte de ATSAMD21J16B-MFT par Microchip Technology et ATSAMD21J16B-AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21J16B-MFT - 64KB Flash Cortex-M0+ MCU 64-QFN | Microchip
ATSAMD21J16B-MFT ✓ ActifMicrochip Technology
ATSAMD21J16B-AU - SAM D21 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J16B-AU ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21J16B-MFT | ATSAMD21J16B-AU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,20 | $2,75 |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ (M0+) |
| Core Architecture | 32-bit RISC | — |
| Maximum CPU Frequency | 48 MHz | — |
| CoreMark Performance | 2.46 CoreMark/MHz | — |
| Program Flash Memory | 64 KB | — |
| SRAM | 8 KB | — |
| Supply Voltage (VDDIN) | 1.62 V to 3.63 V | — |
| I/O Voltage (VDDIO) | 1.62 V to 3.63 V | — |
| Plage de température de fonctionnement | -40C to +125C | -40 C to +85 C |
| Boîtier | 64-pin QFN with Exposed Pad (T&R) | 64-pin TQFP (10x10 mm) |
| Type de montage | Surface Mount | Surface Mount |
| USB Interface | USB 2.0 Full-Speed Device/Host | — |
| ADC | 12-bit, up to 20 channels | 12-bit, 8-channel, up to 350 ksps |
| SERCOM Channels | 6 (configurable UART/SPI/I2C) | — |
| Peripheral Touch Controller (PTC) | Supported | — |
| Statut RoHS | Compliant (GREEN) | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 3 (168 hours) |
| Lead-Free | Yes | Yes |
| CPU Architecture | — | 32-bit RISC |
| Fréquence d'horloge maximale | — | 48 MHz |
| Program Memory (Flash) | — | 64 KB (64K x 8) |
| Data Memory (SRAM) | — | 8 KB |
| Operating Voltage Range | — | 1.62 V to 3.63 V |
| Supply Voltage (nominal) | — | 3.3 V |
| I/O Pins | — | 52 programmable |
| DAC | — | 10-bit, 1-channel |
| USB | — | USB 2.0 Full-Speed with OTG |
| SERCOM | — | 6 configurable (UART/SPI/I2C) |
| Timers | — | 16-bit TC, 8-bit TC, RTC |
| DMAC | — | 12-channel |
| Event System | — | 12-channel |
| External Interrupts (EIC) | — | 16 |
| Debug Interface | — | 2-pin Serial Wire Debug (SWD) |
| Functional Safety | — | FuSa capable |
| Active Current (typ.) | — | 70 uA/MHz |