ATSAMD51G19A-MFT vs ATSAMD51J19A-AFT Comparaison

Comparaison détaillée côte à côte de ATSAMD51G19A-MFT par Microchip Technology et ATSAMD51J19A-AFT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATSAMD51G19A-MFT ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

ATSAMD51G19A-MFT ✓ Actif
Microchip Technology
ATSAMD51J19A-AFT ATSAMD51J19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

ATSAMD51J19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

ATSAMD51J19A-AFT ✓ Actif

Comparaison des spécifications

Paramètre ATSAMD51G19A-MFT ATSAMD51J19A-AFT
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,02 $4,80
Core ARM Cortex-M4F with FPU and DSP instructions —
Maximum CPU Clock 120 MHz 120 MHz
Flash Memory 512 KB (dual-panel with ECC) —
SRAM 192 KB (with ECC) 192 KB
Operating Voltage (VDDIO) 1.71 V to 3.63 V —
Température de fonctionnement -40C to +125C (extended industrial) —
Boîtier 48-pin VQFN (7x7 mm) 64-pin TQFP (10x10 mm)
USB USB 2.0 Full-Speed device and host (integrated PHY) —
SERCOM Modules 6 (each configurable as UART/SPI/I2C) —
ADC 12-bit, up to 1 Msps, up to 16 channels 12-bit, up to 16 channels, 1 Msps
DAC 10-bit, 300 ksps Two 12-bit DAC outputs
Timers 16-bit TC, 32-bit TCC —
CAN CAN-FD controller —
External Bus Interface QSPI / SERCOM-based —
Type de montage Surface Mount Surface Mount
Niveau MSL 3 (168 hours) 3 (168 hours)
Statut RoHS Compliant Compliant
Core Architecture — ARM Cortex-M4F with FPU and DSP
Program Memory (Flash) — 512 KB (512K x 8) dual-panel with ECC
Supply Voltage Range — 1.71 V to 3.63 V (3.3 V nominal)
Plage de température de fonctionnement — -40 C to +125 C (automotive grade)
GPIO Count — 51
Communication Interfaces — 6x SERCOM (USART/SPI/I2C), I2S, USB 2.0 FS with embedded PHY, CAN-FD
Timers/Counters — 5x 16-bit TC, 32-bit RTC with calendar
DMA Channels — 32 (separate descriptor RAM)
Event System — 16 channels, peripheral-to-peripheral
AEC-Q100 — Qualified (automotive grade)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis