ATSAME51N20A-AU vs ATSAME51N20A-AU-EFP Comparaison
Comparaison détaillée côte à côte de ATSAME51N20A-AU par Microchip Technology et ATSAME51N20A-AU-EFP par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME51N20A-AU - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51N20A-AU ✓ ActifMicrochip Technology
ATSAME51N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51N20A-AU-EFP ✓ ActifComparaison des spécifications
| Paramètre | ATSAME51N20A-AU | ATSAME51N20A-AU-EFP |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,97 | $8,10 |
| Core | ARM Cortex-M4F with FPU and DSP | ARM Cortex-M4F (with FPU) |
| Maximum CPU Clock | 120 MHz | 120 MHz |
| Flash Memory | 1 MB (1M x 8) Dual-Panel with ECC | — |
| SRAM | 256 KB | 256 KB |
| Operating Voltage | 2.7 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C | -40C to +85C |
| Boîtier | 100-TQFP (14x14 mm) | 100-pin TQFP (14x14 mm) |
| Type de montage | Surface Mount | Surface Mount |
| ADC | 12-bit, up to 1 MSPS, up to 32 channels | 12-bit, up to 1 Msps |
| Communication Interfaces | 6x SERCOM (UART/SPI/I2C), 1x CAN-FD, 1x USB 2.0 FS, 1x Ethernet MAC | SERCOM (UART/SPI/I2C), I2S, RS-485 |
| Cryptographic Accelerator | AES-128/192/256, SHA-256/HMAC, TRNG | — |
| Timers | 16-bit TC, 32-bit TCC, RTC | — |
| GPIO | [DATA_NEEDED: GPIO count for TQFP-100] | — |
| DMA Channels | 32 (12 dedicated + 20 configurable) | — |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant |
| Core Architecture | — | ARM 32-bit |
| Program Memory (Flash) | — | 1 MB (1M x 8) |
| Flash Type | — | Dual-Panel Flash with ECC |
| Operating Voltage (VDDIO) | — | 3.3 V |
| USB Interface | — | Full-Speed USB 2.0 with embedded PHY |
| CAN Interface | — | 2x CAN-FD controllers |
| DAC | — | 12-bit |
| Timers/PWM | — | 16-bit TCC (Timer/Counter for Control) |
| Debug Interface | — | SWD (Serial Wire Debug) |
| Series | — | SAM E51 / SAM E53 family |
| Suffix Designation | — | EFP = Extended Flash Performance silicon revision |