ATSAME53J18A-MFT vs ATSAME53J18A-MF Comparaison
Comparaison détaillée côte à côte de ATSAME53J18A-MFT par Microchip Technology et ATSAME53J18A-MF par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME53J18A-MFT - 120MHz ARM M4F MCU 256KB Flash | Microchip
ATSAME53J18A-MFT ✓ ActifMicrochip Technology
ATSAME53J18A-MF - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAME53J18A-MF ✓ ActifComparaison des spécifications
| Paramètre | ATSAME53J18A-MFT | ATSAME53J18A-MF |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,45 | $5,40 |
| Core Architecture | ARM Cortex-M4F with FPU | ARM Cortex-M4F (32-bit) |
| Maximum CPU Clock | 120 MHz | — |
| Program Memory (Flash) | 256 KB with ECC | — |
| SRAM | 256 KB with ECC | 128 KB with ECC |
| Boîtier | 64-pin QFN (9x9 mm) with exposed pad | — |
| Operating Voltage (VDDIN) | 3.3 V typical | — |
| Température de fonctionnement | -40C to +125C (extended industrial) | -40C to +125C (extended) |
| Ethernet | 10/100 MAC (GMII/RMII interface, external PHY required) | — |
| USB | USB 2.0 Full-Speed Device and Host | USB 2.0 Full-Speed Device/Host |
| ADC | 12-bit, up to 16 channels, 1 Msps | 12-bit, up to 1 MSPS |
| DAC | 12-bit, 2 channels | 2x 12-bit |
| SERCOM | 8x SERCOM (configurable UART/SPI/I2C) | — |
| PTC (Touch Controller) | Yes, Peripheral Touch Controller | — |
| Cryptographic Engine | AES, TRNG, Integrity Check Module (ICM) | — |
| DMA Channels | 32 channels | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | — |
| Supply Form | Tape & Reel (-MFT suffix) | — |
| Fréquence d'horloge maximale | — | 120 MHz |
| FPU | — | Single-precision IEEE 754 |
| DSP Instructions | — | Yes (SIMD, MAC) |
| Flash Memory | — | 256 KB (256K x 8) with ECC |
| Operating Voltage | — | 3.3 V typical (1.62 V to 3.6 V) |
| Package Type | — | 64-pin QFN with exposed thermal pad (9x9 mm) |
| Ethernet MAC | — | 10/100 Mbps with IEEE 1588 PTP |
| CAN | — | CAN-FD |
| GPIO Count | — | Up to 51 |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch) |