ATSAME54-XPRO vs ATSAME54P20A-AF Comparaison
Comparaison détaillée côte à côte de ATSAME54-XPRO par Microchip Technology et ATSAME54P20A-AF par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ ActifMicrochip Technology
ATSAME54P20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash, Ethernet | Microchip
ATSAME54P20A-AF ✓ ActifComparaison des spécifications
| Paramètre | ATSAME54-XPRO | ATSAME54P20A-AF |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Development Boards | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $80,40 | $8,14 |
| Product Type | Evaluation Kit / Development Board | — |
| Target MCU | ATSAME54P20A | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP extensions) | — |
| Core Architecture | 32-bit RISC | — |
| Maximum Clock Speed | 120 MHz | — |
| Flash Memory | 1 MB dual-panel Flash with ECC (on target MCU) | — |
| SRAM | 256 KB with ECC (on target MCU) | — |
| Embedded Debugger | Atmel EDBG (onboard, no external probe required) | — |
| Debug Interfaces | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) | — |
| Main Crystal | 12 MHz | — |
| Backup Crystal | 32.768 kHz (RTC reference) | — |
| Backup Power | Supercapacitor for RTC retention | — |
| CAN Transceiver | ATA6561 (CAN-FD capable) | — |
| Extension Headers | 2x Xplained Pro extension headers, mikroBUS socket | — |
| Capture Interface | Parallel Capture Controller (ArduCAM compatible) header | — |
| USB Interfaces | USB-C debug (EDBG), USB-C micro-B device | — |
| Operating System Support | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 | — |
| Statut RoHS | Compliant | Compliant |
| Core | — | ARM Cortex-M4F with FPU and DSP extensions |
| Maximum CPU Clock | — | 120 MHz |
| Program Memory (Flash) | — | 1 MB (Dual Panel, with ECC) |
| Data Memory (SRAM) | — | 256 KB (with ECC) |
| Boîtier | — | 128-pin TQFP (14x14 mm) |
| Operating Voltage | — | 1.71 V to 3.6 V |
| Température de fonctionnement | — | -40 C to +125 C (Extended) |
| Ethernet MAC | — | 10/100 Mbps with IEEE 1588 PTP |
| CAN-FD Controllers | — | 2 (Dual CAN-FD) |
| USB Interface | — | USB 2.0 Full-Speed Host/Device |
| ADC | — | 12-bit, up to 1 Msps, up to 32 channels |
| SERCOM Peripherals | — | Yes (configurable UART/SPI/I2C) |
| TrustZone-M | — | Yes (ARM TrustZone for Cortex-M) |
| Cache | — | 4 KB instruction cache |
| Type de montage | — | Surface Mount |
| Niveau MSL | — | 3 |
| Lead-Free / Halogen-Free | — | Yes (per Microchip product page) |