ATSAML11D15A-MUTKPH vs ATSAML11D14A-MUT Comparaison
Comparaison détaillée côte à côte de ATSAML11D15A-MUTKPH par Microchip Technology et ATSAML11D14A-MUT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAML11D15A-MUTKPH - 32KB Flash Cortex-M23 MCU | Microchip
ATSAML11D15A-MUTKPH ✓ ActifMicrochip Technology
ATSAML11D14A-MUT - 32MHz Cortex-M23 TrustZone MCU 16KB Flash | Microchip
ATSAML11D14A-MUT ✓ ActifComparaison des spécifications
| Paramètre | ATSAML11D15A-MUTKPH | ATSAML11D14A-MUT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,05 | $1,62 |
| Core | ARM Cortex-M23 (32-bit, single-core) | ARM Cortex-M23 (ARMv8-M Baseline with TrustZone) |
| Instruction Set | ARMv8-M Baseline with TrustZone | — |
| Fréquence d'horloge maximale | 32 MHz | — |
| Program Memory (Flash) | 32 KB (32K x 8) | — |
| SRAM | 8 KB | 8 KB |
| Operating Voltage | 1.62 V to 3.63 V | — |
| Active Mode Current | < 25 uA/MHz | — |
| Sleep Mode Current | < 100 nA | — |
| Boîtier | VQFN-24 (4x4 mm) with exposed pad | 24-VQFN (4x4 mm) |
| Pin/Package Type | 24-pin VQFN EP T/R | — |
| Peripherals | AES, SHA, TRNG, secure boot, PTC, SERCOM x6, ADC 12-bit, timers, RTC, WDT | — |
| Touch Controller | Enhanced Peripheral Touch Controller (PTC) | — |
| Température de fonctionnement | Extended grade (suffix 85 / industrial) | -40 °C to +85 °C |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Moisture Sensitivity Level | MSL 3 (per JEDEC J-STD-020) | — |
| Packaging | Tape & Reel (MUTKPH suffix = key provisioned, T&R) | — |
| Security Features | TrustZone-M, secure key storage, hardware crypto (AES/SHA/TRNG), secure boot, chip-level tamper resistance | — |
| Connectivity | I2C, SPI, UART/USART, LIN (via SERCOM) | — |
| I/O Count | [DATA_NEEDED: I/O count - check datasheet for 24-pin VQFN GPIO count] | — |
| Maximum Clock Speed | — | 32 MHz |
| Core Performance | — | 2.62 CoreMark/MHz, up to 31 DMIPS |
| Program Flash | — | 16 KB (16K x 8) |
| Data Flash | — | 2 KB |
| Operating Voltage Range | — | 1.62 V to 3.63 V |
| Active Current | — | < 25 µA/MHz |
| Sleep Current | — | < 100 nA |
| Hardware Multiplier | — | Single-cycle 32-bit |
| Hardware Divider | — | Yes |
| NVIC | — | Yes |
| Memory Protection Unit (MPU) | — | Yes |
| TrustZone for ARMv8-M | — | Yes |
| Bit Width | — | 32-bit |