ATTINY4313-PU vs ATTINY2313A-SU Comparaison

Comparaison détaillée côte à côte de ATTINY4313-PU par Microchip Technology et ATTINY2313A-SU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATTINY4313-PU ATTINY4313-PU - 20MHz AVR 8-Bit MCU | Microchip Technology

ATTINY4313-PU - 20MHz AVR 8-Bit MCU | Microchip Technology

ATTINY4313-PU ✓ Actif
Microchip Technology
ATTINY2313A-SU ATTINY2313A-SU - 20MHz 8-bit AVR MCU, 2KB Flash | Microchip

ATTINY2313A-SU - 20MHz 8-bit AVR MCU, 2KB Flash | Microchip

ATTINY2313A-SU ✓ Actif

Comparaison des spécifications

Paramètre ATTINY4313-PU ATTINY2313A-SU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Product Type 8-bit AVR RISC-based microcontroller —
Fréquence d'horloge maximale 20 MHz 20 MHz
Program Flash Memory 4 KB (2K x 16) —
EEPROM Memory 128 bytes —
SRAM 128 bytes 128 B
General-Purpose I/O Lines 18 lines 18
General-Purpose Working Registers 32 registers 32
Operating Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V
Timer/Counter Blocks 2 blocks —
Debug Interface Single-wire on-chip debugging —
Architecture AVR enhanced RISC —
Largeur du bus de données 8 bits —
Boîtier 20-pin PDIP 20-pin SOIC (wide-body, 300 mil)
Type de montage Through-hole Surface Mount
Terminal Count 20 terminals —
Temperature Grade Industrial —
Operating Voltage 1.8 V to 5.5 V —
Statut RoHS Not stated in the manufacturer product information Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Core Architecture — AVR 8-bit RISC
Program Memory (Flash) — 2 KB (1K x 16)
EEPROM — 128 B
Plage de température de fonctionnement — -40 C to +85 C
Supply Voltage - Min — 2.5 V
Supply Voltage - Max — 5.5 V
Timer/Counters — 2 (8-bit and 16-bit, with compare/PWM modes)
USART — 1 hardware USART
Serial Interfaces — USART, USI (SPI / TWI), debugWIRE
Interrupt Sources — 12
Watchdog Timer — Yes, enhanced, separate on-chip oscillator
Internal Oscillator — Calibrated RC, configurable
Analog Comparator — Yes (on-chip)
Niveau MSL — MSL 1 (per Microchip product page)
Lead-Free / Halogen-Free — Yes / Yes
AEC-Q100 Automotive Qualification — Not qualified

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis