BQ4845S-A4N vs BQ4845S-A4NTRG4 Comparaison
Comparaison détaillée côte à côte de BQ4845S-A4N par Texas Instruments et BQ4845S-A4NTRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
BQ4845S-A4N - Parallel RTC with CPU Supervisor | Texas Instruments
BQ4845S-A4N UnknownComparaison des spécifications
| Paramètre | BQ4845S-A4N | BQ4845S-A4NTRG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Clock & Timing | Clock & Timing |
| Statut du cycle de vie | Unknown | Actif |
| Device Type | Real-time clock (RTC) with CPU supervisor | — |
| Timekeeping Format | Seconds through years in BCD format | — |
| Calendar Capability | 100-year calendar | — |
| Interface | Parallel SRAM-compatible clock/calendar and control interface | — |
| Clock Crystal Frequency | 32.768 kHz | — |
| Backup Battery | 3 V | — |
| Backup Mode Clock Current | Less than 500 nA | — |
| NVSRAM Control | On-chip battery-backup switchover with nonvolatile external-SRAM control | — |
| Supervisory Functions | CPU supervisor, watchdog timer, and microprocessor reset features | — |
| Programmable Interrupts | Yes | — |
| Alarm Support | Yes | — |
| Daylight Saving Time | Yes | — |
| Leap-Year Handling | Yes | — |
| Battery Low Warning | Yes | — |
| Boîtier | 28-pin SOIC, 0.295 inch body width, 7.50 mm width | 28-pin SOIC, 7.50 mm width |
| Technology | CMOS | — |
| Terminal Count | 28 terminals | — |
| Plage de température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Product Type | — | Parallel real-time clock and calendar with CPU supervisor |
| Main Supply Voltage Range | — | 4.75 V to 5.5 V |
| Backup Battery Voltage Range | — | 2.3 V to 4 V |
| Crystal Frequency | — | 32.768 kHz |
| Clock Format | — | BCD |
| Date Format | — | BCD |
| Host Interface | — | Parallel |
| Operating Features | — | Alarm, daylight-saving time, leap year, watchdog timer, processor reset, interrupt, and battery-low warning |
| Calendar Range | — | 100 years |
| Backup Clock Operating Current | — | Less than 500 nA |
| Watchdog Input Bias | — | Approximately 1.6 V through a 100 kilohm-equivalent internal resistor network |
| Battery Voltage Output | — | VOUT output available |
| External SRAM Control | — | CEOUT write-protection output available |
| Power-Fail Behavior | — | Watchdog disabled and WDI disconnected from the internal resistor network below the power-fail threshold |