BSP452 vs BSP742RIXUMA1 Comparaison
Comparaison détaillée côte à côte de BSP452 par Infineon et BSP742RIXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BSP452 | BSP742RIXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,78 | $0,96 |
| Product Type | Smart High-Side Power Switch (Classic PROFET 12V) | Smart High-Side Power Switch |
| Technology | N-channel vertical power FET with charge pump (Smart SIPMOS) | — |
| Number of Channels | 1 | — |
| Input Compatibility | CMOS compatible logic-level input, ground referenced | — |
| Nominal Load Current | 1.1 A | — |
| DC Continuous Load Current (DigiKey listing) | 700 mA | — |
| Supply Voltage (Vbb) | 60 V max (avalanche rated) | — |
| On-Resistance (Rds(on)) | [DATA_NEEDED: typical Rds(on) in mOhm] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] | -40 °C to +150 °C |
| Boîtier | PG-SOT223-4 (4-pin SOT-223 with tab) | PG-DSO-8-6 (SOIC-8, 3.90 mm body) |
| Type de montage | Surface Mount | Surface Mount |
| Diagnostic Feedback | Yes (status output) | — |
| Protection Features | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery | — |
| ESD Rating (HBM, per datasheet) | Tested per MIL-STD-883D Method 3015.7 | — |
| Load Dump Protection | Per ISO 7637-1 and DIN 40839 | — |
| Lead-Free / RoHS | Yes (Infineon standard) | — |
| Topologie | — | 1:1 N-Channel High-Side |
| Family | — | miniPROFET |
| Output Current (Nominal) | — | 400 mA |
| RDS(on) Typical at 25°C | — | 250 mΩ |
| Tension d'alimentation de fonctionnement | — | 5 V to 34 V |
| Load Dump Tolerance | — | 41 V |
| Reverse Battery Protection | — | -16 V |
| On-State Resistance (max) | — | [DATA_NEEDED: RDS(on) maximum at 25°C] |
| Limitation de courant | — | [DATA_NEEDED: current limit typical value] |
| Arrêt thermique | — | Yes with auto restart |
| Overvoltage Protection | — | Yes (including load dump) |
| Short Circuit Protection | — | Yes |
| Open Load Detection | — | Yes (diagnostic pin) |
| Demagnetization of Inductive Loads | — | Yes (internal) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Statut RoHS | — | Compliant |