BTH62004ESAXUMA1 vs BTS740S2XUMA1 Comparaison
Comparaison détaillée côte à côte de BTH62004ESAXUMA1 par Infineon et BTS740S2XUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTH62004ESAXUMA1 - 4-Ch 200mΩ 48V Smart High-Side Switch | Infineon
BTH62004ESAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTH62004ESAXUMA1 | BTS740S2XUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,18 | $1,92 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET+ 48V | — |
| Number of Channels | 4 | 2 |
| Topologie | 4 x High-Side (1:1) | High-Side Switch, 1:1 N-Channel |
| On-State Resistance (RDS(on)) | 200 mΩ typical per channel | — |
| Nominal Load Current per Channel | 1 A | — |
| Supply Voltage Range | Up to 54 V | — |
| Load-Dump Tolerance | 60 V (transient, per datasheet) | — |
| Power Transistor Technology | N-channel vertical power MOSFET with charge pump | — |
| Current Sense Diagnosis | Yes (analog IS pin) | — |
| Protection Features | Over-temperature, over-voltage, short-circuit, reverse battery | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Boîtier | PG-TSDSO-24-21 (exposed pad) | PG-DSO-20 (Power Small Outline, 20-pin) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Part Number | — | BTS740S2XUMA1 |
| Manufacturer | — | Infineon Technologies |
| Fonction | — | Dual-channel Smart High-Side Power Switch |
| Output Current per Channel | — | 4.9 A |
| Operating Voltage (Load) | — | 5 V to 28 V |
| Logic Supply Voltage | — | 3.0 V to 5.5 V |
| Input Type | — | CMOS-compatible, logic ground isolated |
| R_DS(on) per Channel | — | [DATA_NEEDED: R_DS(on) typical value] |
| On-State Resistance (typ, per channel) | — | [DATA_NEEDED: R_DS(on) typical value] |
| Demagnetization | — | Fast active demagnetization for inductive loads |
| Diagnostic Output | — | Yes (open-load, short detection) |
| Standby Current | — | [DATA_NEEDED: I_stby typical] |
| Automotive Qualified | — | AEC-Q100 (PROFET family) |
| Statut RoHS | — | Compliant |