BTM9011EPXUMA1 vs BTH60801EPLXUMA1 Comparaison
Comparaison détaillée côte à côte de BTM9011EPXUMA1 par Infineon et BTH60801EPLXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTM9011EPXUMA1 | BTH60801EPLXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $1,74 |
| Topologie | Full-bridge (H-bridge) with integrated power MOSFETs | High-Side N-Channel MOSFET with Charge Pump |
| Output Current Limit | 10 A (typ) | — |
| Path Resistance (per HS+LS) | 175 mΩ typical at 25 °C | — |
| Pulse Current (tpulse ≤ 1 s at 85 °C) | 5.2 A | — |
| Pulse Current (tpulse ≤ 10 s at 85 °C) | 4.2 A | — |
| Supply Voltage Range (normal) | 7 V to 18 V | — |
| Supply Voltage Range (extended) | 4.5 V to 40 V | — |
| PWM Frequency | up to 20 kHz | — |
| Interface | SPI (status, configuration, diagnostics) | — |
| Current Limitation | Min, integrated | Adjustable |
| Technology | BCD (Bipolar-CMOS-DMOS) monolithic | — |
| Boîtier | PG-TSDSO-14 with exposed pad | PG-TSDSO-14 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| Operating Temperature (junction) | -40 °C to +150 °C | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| On-State Resistance (RDS(on)) | — | 80 mΩ (typical) |
| Continuous Load Current | — | 2.5 A |
| Operating Voltage Range | — | 4 V to 54 V |
| Nominal Board Net | — | 48 V (PROFET+ 48V family) |
| Diagnostic Output | — | Current Sense (IS) pin |
| Input Logic | — | Active High and Active Low |
| Protection Features | — | Overtemperature, Overvoltage, Undervoltage, Short Circuit |
| Plage de température de fonctionnement | — | -40 °C to +150 °C (Tj) |
| Statut RoHS | — | Compliant |