BTS3256DAUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS3256DAUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS3256DAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,43 | $3,18 |
| Product Type | Smart Low-Side Power Switch | — |
| Technology | HITFET (N-channel vertical DMOS) | — |
| Number of Channels | 1 | 4 |
| Configuration de sortie | Low-Side, 1:1 | High-side, N-channel MOSFET |
| Continuous Drain Current | 7.5 A | — |
| Operating Voltage Range | 4.5 V to 28 V (load supply Vbb) | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| On-State Resistance (RDS(on)) | 50 mOhm typical | — |
| Overvoltage Clamp | Integrated | — |
| Arrêt thermique | Yes (with auto-restart) | — |
| Current Limitation | Yes (integrated) | — |
| Status Feedback | Yes (open-drain status pin) | — |
| ESD Protection | Yes (per datasheet) | — |
| Operating Temperature (Junction) | -40 C to +150 C | — |
| Boîtier | PG-TO252-5-11 (DPAK-5) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualified | Yes (AEC-Q100) | — |
| RoHS Compliance | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |