BTS4142NHUMA1 vs BSP742RXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS4142NHUMA1 par Infineon et BSP742RXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS4142NHUMA1 | BSP742RXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,97 | $0,81 |
| Product Type | Smart High-Side Power Switch (Classic PROFET 24V) | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Switch Topology | High-side, N-channel vertical MOSFET | — |
| Nominal Output Current | 1.4 A | — |
| On-State Resistance (RDS(on)) | 70 mOhm (typical) | — |
| Tension d'alimentation de fonctionnement | 6 V to 42 V | — |
| Load-Dump Protection | Yes (integrated overvoltage clamp) | — |
| Overload Protection | Yes (current limiting) | — |
| Thermal Protection | Yes (shutdown with auto-restart) | — |
| Undervoltage Shutdown | Yes (auto-restart with hysteresis) | — |
| ESD Protection (Input Pin) | Yes | — |
| Diagnostic Feedback | Yes (open-load, fault) | — |
| Boîtier | PG-SOT223-4 | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +150C (junction) | — |
| Statut RoHS | Compliant | — |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Operating Voltage Range (Vbb) | — | 5 V to 34 V |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| Plage de température de fonctionnement | — | -40°C to +150°C (TJ) |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Protection Features | — | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |