BTS4142NHUMA1 vs BTS3046SDRATMA1 Comparaison
Comparaison détaillée côte à côte de BTS4142NHUMA1 par Infineon et BTS3046SDRATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS4142NHUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,97 | $0,74 |
| Product Type | Smart High-Side Power Switch (Classic PROFET 24V) | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 1 | — |
| Switch Topology | High-side, N-channel vertical MOSFET | — |
| Nominal Output Current | 1.4 A | — |
| On-State Resistance (RDS(on)) | 70 mOhm (typical) | — |
| Tension d'alimentation de fonctionnement | 6 V to 42 V | — |
| Load-Dump Protection | Yes (integrated overvoltage clamp) | — |
| Overload Protection | Yes (current limiting) | — |
| Thermal Protection | Yes (shutdown with auto-restart) | — |
| Undervoltage Shutdown | Yes (auto-restart with hysteresis) | — |
| ESD Protection (Input Pin) | Yes | — |
| Diagnostic Feedback | Yes (open-load, fault) | — |
| Boîtier | PG-SOT223-4 | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +150C (junction) | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Plage de température de fonctionnement | — | -40 C to +150 C |
| Protection Features | — | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |