BTS441RGATMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS441RGATMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS441RGATMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,21 | $1,68 |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | — |
| Nombre de sorties | 1 | — |
| Continuous Load Current | 17 A | — |
| Topologie | Smart High-Side Switch | Dual High-Side Switch (2 channels) |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | Smart6 (N-channel vertical MOSFET with charge pump) |
| Boîtier | PG-TO263-5-2 (TO-263-5) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Nombre de broches | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | Yes |
| Statut RoHS | Compliant | Compliant |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |