BTS452TATMA1 vs ITS4140NHUMA1 Comparaison
Comparaison détaillée côte à côte de BTS452TATMA1 par Infineon et ITS4140NHUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS452TATMA1 | ITS4140NHUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,12 | $0,72 |
| Part Number | BTS452TATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | MINI-PROFET (Smart High-Side Power Switch) | — |
| Switch Type | High-Side, N-Channel | N-Channel (vertical, integrated) |
| Nombre de sorties | 1 | — |
| Supply Voltage (Operating) | 6 V to 52 V | — |
| Continuous Load Current | 1.8 A | — |
| On-State Resistance (RDS(on)) | 200 mOhm (typical) | — |
| Input Logic Level | TTL/CMOS compatible | — |
| Température de fonctionnement | -40 C to +150 C junction | — |
| Boîtier | PG-TO252-5 (DPAK-5) | PG-SOT223-4 (3+Tab) |
| Type de montage | Surface Mount | Surface Mount |
| Status Output | Open-drain diagnostic flag | — |
| Protection Features | Overcurrent, Short-circuit, Thermal shutdown with restart, Overvoltage (load dump), Undervoltage shutdown | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Technology | SIPMOS vertical DMOS with charge pump | — |
| Statut RoHS | Compliant | Compliant |
| Fonction | — | High-Side Power Switch / Load Driver |
| Topologie | — | 1:1 (Input to Output) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overload Protection | — | Yes |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| Niveau MSL | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |