BTS5014SDAAUMA1 vs ITS4142NHUMA1 Comparaison
Comparaison détaillée côte à côte de BTS5014SDAAUMA1 par Infineon et ITS4142NHUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS5014SDAAUMA1 | ITS4142NHUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,55 | $0,88 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Topologie | N-Channel vertical power MOSFET with charge pump | 1:1 N-Channel High-Side |
| Nominal Load Current | 6 A | — |
| Tension d'alimentation de fonctionnement | 5 V to 28 V (load-dump tolerant to 41 V) | 5 V to 34 V (load-dump tolerant to 45 V) |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Limitation de courant | [DATA_NEEDED: ICL typical] | — |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | — |
| Boîtier | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-SOT223-4 (4-pin SOT-223) |
| Type de montage | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| Statut RoHS | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Manufacturer | — | Infineon Technologies |
| Nombre de sorties | — | 1 |
| Continuous Load Current | — | 1.4 A |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) at 25C] |
| Logic Input Voltage | — | Logic-level, 3.3 V and 5 V compatible |
| Overvoltage Protection | — | Yes, including load dump |
| Undervoltage Shutdown | — | Yes, with auto-restart and hysteresis |
| Short Circuit Protection | — | Yes, with current limitation |
| Overload Protection | — | Yes |
| Arrêt thermique | — | Yes |
| Diagnostic Feedback | — | Yes, open-drain status output |
| Inductive Load Switching | — | Yes, with internal clamping |
| Température de fonctionnement | — | -40C to +125C (junction) |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive grade variant status] |