BTS52001ENAXUMA1 vs BTS118DATMA1 Comparaison
Comparaison détaillée côte à côte de BTS52001ENAXUMA1 par Infineon et BTS118DATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS52001ENAXUMA1 | BTS118DATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,82 | $0,78 |
| Product Type | Smart High-Side Power Switch | — |
| Family | Classic PROFET 12V | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 1 | — |
| On-State Resistance (RDS(on)) | 200 mΩ (typical) | [DATA_NEEDED: RDS(on) typical @ 25C] |
| Continuous Load Current | 1.5 A | — |
| Nominal Operating Voltage | 12 V | — |
| Operating Voltage Range | 4.5 V to 28 V (load-dump tolerant) | — |
| Input Control | Logic-level, active-high | — |
| Diagnostic Output | Yes (status feedback) | — |
| Open-Load Detection | Yes (in OFF state) | — |
| Current Limitation | Yes (integrated) | Yes |
| Over-Temperature Protection | Yes (with auto-restart) | — |
| Over-Voltage Protection | Yes (load-dump robust) | — |
| Boîtier | PG-TDSO-8-31 (Exposed Pad) | PG-TO252-3-11 (DPAK) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +150 °C | -40C to +150C (junction) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Target Load | 1× R10W 12V lamp, LEDs | — |
| Part Number | — | BTS118DATMA1 |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Smart SIPMOS Low-Side Power Switch |
| Topologie | — | 1:1 N-Channel Smart Low-Side Switch |
| Load Supply Voltage (Vbb max) | — | 42 V |
| Continuous Drain Current | — | 2.4 A |
| Input Logic Level | — | CMOS / TTL compatible |
| Input Protection | — | ESD protected |
| Thermal Protection | — | Thermal shutdown with auto-restart |
| Overload Protection | — | Yes |
| Short-Circuit Protection | — | Yes |
| Overvoltage Protection | — | Yes (Vbb transient) |
| Status Feedback | — | Open-drain diagnostic output (shared with IN) |
| RoHS / REACH | — | Green product, RoHS compliant, lead-free |
| Niveau MSL | — | MSL 3 (per JEDEC J-STD-020) |