BTS52004EKAXUMA1 vs BTS52001ENAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS52004EKAXUMA1 par Infineon et BTS52001ENAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS52004EKAXUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,65 | $0,82 |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | High-Side, 1:1 N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | Yes (status feedback) |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C |
| Boîtier | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TDSO-8-31 (Exposed Pad) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | Smart6 (N-channel vertical MOSFET with charge pump) |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | — |
| Family | — | Classic PROFET 12V |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |