BTS52004EKAXUMA1 vs BTS70082EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS52004EKAXUMA1 par Infineon et BTS70082EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS52004EKAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,65 | $2,05 |
| Product Type | Quad Smart High-Side Power Switch | — |
| Topologie | High-Side, 1:1 N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 2 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | [DATA_NEEDED: standby current uA] |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Diagnostic Output | IS pin (proportional load current sense) | Current-sense (IS) pin, analog/digital |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | — |
| Boîtier | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | — |
| Niveau MSL | 3 (per JEDEC J-STD-020) | MSL3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | Compliant |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Switch Type | — | High-side N-channel MOSFET switch |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Température de jonction en fonctionnement | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |