BTS52004EKAXUMA1 vs BTT60101ERBXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS52004EKAXUMA1 par Infineon et BTT60101ERBXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS52004EKAXUMA1 | BTT60101ERBXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,65 | $2,24 |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | High-Side, 1:1 N-Channel MOSFET with charge pump | N-Channel vertical MOSFET with charge pump |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | Status pin (ST) and current sense (IS) |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C |
| Boîtier | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | — |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | — |
| On-State Resistance (Typ) | — | 10 mΩ |
| Continuous Load Current | — | 9 A |
| Supply Voltage Range | — | 5 V to 36 V |
| Reverse Battery Protection | — | up to -36 V |
| Input Control Logic | — | Active High |
| Process Technology | — | Infineon Smart6 |
| Targeted Lamp Load | — | 5 × P21W 24 V or 1 × H55W 12 V |
| Compliance | — | RoHS |