BTS70021EPPXUMA1 vs BTS6143DAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70021EPPXUMA1 par Infineon et BTS6143DAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ ActifInfineon
BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET
BTS6143DAUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS70021EPPXUMA1 | BTS6143DAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,32 | $1,21 |
| Product Family | PROFET+2 12V | — |
| Topologie | Smart High-Side Switch, N-Channel MOSFET | High-Side |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | Yes |
| Short-Circuit Protection | Yes (latched) | Yes (with latch) |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| Plage de température de fonctionnement | -40 C to +150 C junction | — |
| Boîtier | PG-TSDSO-14-22 (exposed pad) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| Statut RoHS | Compliant (Green Product) | — |
| Product Type | — | Smart High-Side Power Switch (PROFET) |
| Number of Channels | — | 1 |
| Configuration de sortie | — | N-Channel vertical MOSFET |
| Nominal Load Voltage (Vbb) | — | 12 V (automotive) |
| Operating Voltage Range (Vbb) | — | [DATA_NEEDED: operating voltage range] |
| Continuous Output Current (IL) | — | 8 A (typical) |
| On-State Resistance (R_DS(on)) | — | [DATA_NEEDED: typical R_DS(on) in mOhm] |
| Current Limitation | — | Yes |
| Arrêt thermique | — | Yes (with auto-restart) |
| Overvoltage Protection | — | Yes (including load dump) |
| Loss-of-Ground Protection | — | Yes |
| Loss-of-Vbb Protection | — | Yes |
| Diagnostic Output | — | Yes (status/fault feedback) |
| Operating Temperature Range (Tj) | — | -40 C to +150 C |
| Automotive Grade | — | Yes (AEC-Q100 qualified PROFET family) |