BTS70021EPPXUMA1 vs BTT60302ERAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70021EPPXUMA1 par Infineon et BTT60302ERAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS70021EPPXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,32 | $2,18 |
| Product Family | PROFET+2 12V | — |
| Topologie | Smart High-Side Switch, N-Channel MOSFET | — |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | 8 V to 36 V |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | [DATA_NEEDED: standby current] |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| Plage de température de fonctionnement | -40 C to +150 C junction | — |
| Boîtier | PG-TSDSO-14-22 (exposed pad) | PG-TDSO-14-31 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| Statut RoHS | Compliant (Green Product) | Compliant |
| Product Type | — | Dual-channel Smart High-Side Power Switch |
| Family | — | PROFET+ 24V |
| Number of Channels | — | 2 |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Load-Dump Tolerance | — | 42 V |
| Switch Type | — | 1:1 N-Channel high-side |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Diagnostic Output | — | Current sense (IS pin) |
| Protection Features | — | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Automotive Qualification | — | AEC-Q100 |
| Température de fonctionnement | — | -40 °C to +150 °C junction |