BTS70041EPZXUMA1 vs BTS70081EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70041EPZXUMA1 par Infineon et BTS70081EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70041EPZXUMA1 | BTS70081EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,05 | $0,96 |
| Manufacturer | Infineon Technologies AG | — |
| Series | PROFET®+2 (Automotive, AEC-Q100) | — |
| Switch Type | High-Side N-Channel Power Switch (1:1) | — |
| Number of Channels | 1 | — |
| Maximum Continuous Load Current | 15 A | — |
| Operating Voltage Range (Vbb) | 3.1 V to 28 V | — |
| Reverse Battery Robustness | -28 V on Vbb | — |
| On-State Resistance R_DS(on) | [DATA_NEEDED: R_DS(on) typical in mΩ] | — |
| Current Limitation | Active, with latch clear via DEN pulse | — |
| Overtemperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Short-Circuit Protection | Yes (current-limit and latch) | — |
| Diagnostic Output | DEN pin (digital/analog fault feedback) | Open-drain status / current sense |
| Input Pin (IN) | Logic-level control, 3.3 V / 5 V compatible | — |
| Operating Temperature Range (TJ) | -40 °C to +175 °C | — |
| Boîtier | PG-TDSO-14-11 (14-pin, exposed thermal pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | MSL 2A (4 weeks) | [DATA_NEEDED: MSL rating] |
| Qualification | AEC-Q100 (automotive grade) | — |
| Packaging | Tape & Reel | — |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch (PROFET) |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 10 A |
| On-State Resistance (RDS(on) typ.) | — | 9 mOhm |
| Tension d'alimentation de fonctionnement | — | 6 V to 18 V |
| Load-Dump Survival Voltage | — | 28 V (per AEC-Q100) |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Current Limitation (typ.) | — | [DATA_NEEDED: IL(LIM) value] |
| Protection Features | — | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss |
| Plage de température de fonctionnement | — | -40 C to +150 C (Tj) |
| Package Width | — | 3.90 mm (TSSOP-14 EP equivalent) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Lead-Free | — | Yes |