BTS70082EPAXUMA1 vs BTS52001ENAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70082EPAXUMA1 par Infineon et BTS52001ENAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTS70082EPAXUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $0,82 |
| Product Family | PROFET+2 (12 V, dual channel) | — |
| Switch Type | High-side N-channel MOSFET switch | — |
| Number of Channels | 2 | 1 |
| On-Resistance (RDS(on)) per channel | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) | — |
| Continuous Load Current per channel | 7.5 A | — |
| Nominal Supply Voltage | 12 V | — |
| Operating Supply Voltage Range | 3.1 V to 28 V | — |
| Load Dump / Transient Tolerance | 42 V per ISO 7637-2 | — |
| Reverse Battery Protection | -16 V | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Current Sense (IS) Ratio kILIS | 5000 (typical) | — |
| Protection Features | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss | — |
| Diagnostic Output | Current-sense (IS) pin, analog/digital | Yes (status feedback) |
| Température de jonction en fonctionnement | -40 °C to +150 °C | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) | PG-TDSO-8-31 (Exposed Pad) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | — |
| Product Type | — | Smart High-Side Power Switch |
| Family | — | Classic PROFET 12V |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Plage de température de fonctionnement | — | -40 °C to +150 °C |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |