BTS70082EPAXUMA1 vs BTS52004EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70082EPAXUMA1 par Infineon et BTS52004EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTS70082EPAXUMA1 | BTS52004EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $1,65 |
| Product Family | PROFET+2 (12 V, dual channel) | — |
| Switch Type | High-side N-channel MOSFET switch | — |
| Number of Channels | 2 | 4 |
| On-Resistance (RDS(on)) per channel | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) | — |
| Continuous Load Current per channel | 7.5 A | — |
| Nominal Supply Voltage | 12 V | — |
| Operating Supply Voltage Range | 3.1 V to 28 V | — |
| Load Dump / Transient Tolerance | 42 V per ISO 7637-2 | — |
| Reverse Battery Protection | -16 V | — |
| Standby Current | [DATA_NEEDED: standby current uA] | [DATA_NEEDED: typical Ibb(off)] |
| Current Sense (IS) Ratio kILIS | 5000 (typical) | — |
| Protection Features | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss | Short-circuit, overload, overtemperature, overvoltage, open-load detection |
| Diagnostic Output | Current-sense (IS) pin, analog/digital | IS pin (proportional load current sense) |
| Température de jonction en fonctionnement | -40 °C to +150 °C | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | Quad Smart High-Side Power Switch |
| Topologie | — | High-Side, 1:1 N-Channel MOSFET with charge pump |
| On-Resistance (Ron, typ) | — | 200 mΩ per channel |
| Continuous Load Current per Channel | — | 800 mA |
| Operating Voltage Range (Vbb) | — | 5 V to 38 V |
| Load Dump Tolerance | — | Up to 38 V |
| Quiescent Current (active) | — | [DATA_NEEDED: Ibb(on) typ] |
| PWM Frequency (max) | — | 1 kHz |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| Technology | — | Infineon Smart6 |